Saturday, December 16, 2017
Home > FPV Drone > The Four Mini FPV Quadcopters

The Four Mini FPV Quadcopters

RND Indy 250

Now FPV Quadcopters have got more and more popular, many drone loves are trying to play FPV Quadcopters, and there are many FPV racing on the world, like the 2016 World Drone Fpv Racing Championships in Hawaii, it is a wonderful FPV Racing, the pilots are come from all over the world. The UAVs are not only used to shooting, more and more pilots like to racing. There are four mini FPV quadcopters and most FPV lovers like them, some of them are used to racing.

Skylark M4-FPV250

Skylark M4-FPV250 is a Mini Racing Sport Quadcopter, it is also used to racing.

Skylark M4-FPV250 Materials

(Clcik here to buy it)

Specification:

  • Weight: 395g (without battery)
  • Total Weight: 554g
  • Flying Time: about 10min
  • Suggest Battery: 2200mAh 3S 

Package Includes:

  • 1 x FPV250 Racing Quad Frame
  • 4 x MT1806 Brushless Motors(2 CW + 2 CCW)
  • 4 x 12A ESC
  • 4 x 5030 Propellers (2 CW + 2 CCW)
  • 1 x RC Transmitter (6-channel)
  • 1 x RC Receiver (6-channel)
  • 1 x 5.8G 600mw Video Transmitter
  • 1 x 5.8G Receiver (Optoinal, need to be purchased separately)

You can DIY a Skylark M4-FPV250, and the following Materials are suitable for you; but if you want to use this quadcopter to racing, you must choose a high discharge, high capacity and light weight lipo battery, I recommend you can use 2200MaH 3s 25c lipo battery, this battery’s weight is only 172g, and with 25c discharge and 1300mAh high capacity, it is a good choice for a racing Skylark M4-FPV250.

RND Indy 250

RND Indy 250 also be a Racing quad-copter, and it has many lovers. The Transmitter-Ready RND Indy 250 is a carbon fibre frame quad-copter specifically designed for Racing.RND Indy 250

(Clcik here to buy it)

Specification:

  • Motors: Rctimer HP1806 2300kv (pre-installed)
  • ESCs: 20A OPTO BLHeli (pre-installed)
  • Flight control system: Pre-tuned CC3D OpenPilot
  • Extremely durable carbon fibre construction
  • PCB/PDB base with 5V and 12V output pins
  • Plastic composite 450 helicopter style landing gear
  • FPV Dual 45degree Receiver Antenna Mount
  • 4 pairs Green 5×3″, 4 pairs Red 5×3″, 5 pairs Orange 5×3″ and 5 pairs
  • Black 5×3″ Nylon Propellers
  • Weight: 263g
  • 5 or 6 channel RC transmitter & receiver.
  • Battery: 1300-2200mAh 3S LiPo battery.

About this Quad, it is lighter than Skylark M4-FPV250, it is only 263g, so RND Indy 250 can equip with high capacity battery. And you require is a suitable RC transmitter and receiver and a LiPo battery. It is fitted with green and red directional LEDs and comes with 18 pairs of spare propellers. The fully tune-able OpenPilot CC3D flight controller is pre-installed as are the high speed ESC’s.

QAV 180

The QAV180 Carbon Fiber FPV Quadcopter airframe is the smallest FPV quad kit to date. It is designed around 4″ props and 1806 size motors with 2300kv and up.

QAV 180

(Clcik here to buy it)

Specification:

  • Motors: Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
  • Battery: Suggested 1000mAh 3s lipo battery
  • Weight: 85g (with PDB and hardware), 90g with included Landing Gear.
  • Airframe: AUW: The QAV180 is flown with an AUW of 250-275g depending on motor choice (includes all flight electronics and FPV gear, but without Lipo or HD camera).

Package Includes:

  • 1x QAV180 carbon fiber airframe, board camera mount, 26mm camera mount, and hardware (including 35mm frame spacers)
  • 1x Lumenier 4Power Power distribution board + set of 6mm stand offs
  • 1x XT-60 Pig-Tail and silicone grommet
  • 1x set of 10mm aluminum landing gear and vinyl feet
  • 4″ Anti-Vibration neoprene tape

QAV180 support for 32mm board cams as well as 26mm cams in cases such as the Lumenier CM-650. Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)

QAV210

Like it’s popular ‘big brother’, the QAV250, the QAV210 CHARPU utilizes high quality 3K carbon fiber that is precision machined for a superb fit-and-finish. The QAV210 CHARPU is an awesome FPV racer and acrobat. The frame is designed to mount a mini 26mm FPV camera like the Lumenier CM-650 at a range of angles. Alternatively, the frame also includes a mounting plate to mount standard 32mm board cameras at a fixed 20 degree angle.

QAV 210

(Clcik here to buy it)

Specification:

  • Motors: Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
  • Battery: 1300mAh 3s lipo or 1300mAh 4s lipo
  • Weight: 91g (with PDB and hardware), 96g with included Landing Gear.
  • AUW: The QAV210 is flown with an AUW of 256-281g depending on motor choice (includes all flight electronics and FPV gear, but without Lipo or HD camera).

Package Includes:

  • 1x QAV210 CHARPU carbon fiber airframe, board camera mount, 26mm camera mount, and hardware (including 35mm frame spacers)
  • 1x Lumenier 4Power Power distribution board + set of 6mm stand offs
  • 1x XT-60 Pig-Tail and silicone grommet
  • 1x set of 10mm aluminum landing gear and vinyl feet
  • 4″ Anti-Vibration neoprene tape

Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail. The QAV210 CHARPU does not exhibit any vibration in the on-board FPV camera signal. For pilots that wish to equip their QAV210 CHARPU with a Mobius, GoPro or GoPro Session, Lumenier offers a vibration isolation camera mounting kit.

END

Those FPV quadcopters have different use, Skylark M4-FPV250 and RND Indy 250 are also used to racing, but QAV180 and QAV210 also used to DIY. You can according your need to choose your quadcopter.

One thought on “The Four Mini FPV Quadcopters

Leave a Reply