Want to fly FPV Quadcopter? Most people want to fly a plane, and FPV quadcopter help us come true with my dream. Flying things are cool, especially when they’re fast! Follow along as I build this 250 sized mini FPV racing quad with cheap price.
First we should prepare my quadcopter Materials, I bought them from online, search by google or Amzon. [Read More…]
Prop Balancing And Mounting-Build A Quadcopter- Part 5
Teaching you “how to build a quadcopter”, this is the Part 5, Prop Balancing And Mounting, there is a video to tell you how to do it.
In this section we’ll be balancing and mounting the props; [Read More…]
Build A Quadcopter-Part 4
Flight Controller Setup
After Mounting The Quad’s Electronics, the next step is Flight Controller Setup, there is a video about how to set up flight controller. Flight Controller Setup is a important step, too. if you do something wrong with the flight controller, your quad will out off control and not safe to your drone, even to your body. [Read More…]
Build A Quadcopter-Part 3
Mounting The Quad’s Electronics
Here is a Video about how to mount the electronics include the ESCS, Flight Controller and Receiver by Korey Smith which come from My First Drone.com. This is the third step of build a quadcopter, and this is very important and hard, but It’s dogged that does it; Korey Smith, a RC model enthusiast and co-owner of MyFirstDrone, will teach you how to Mounting The Electronics.
Build A Quadcopter-Part 2
Mounting The Motors And Speed Controllers
This is the second part of Build A Quadcopter, on this part, I will mainly talk about how to Mounting The Motors And Speed Controllers. You can watch the video or read our detailed steps. And if you have not watch the Part 1of build a quadcopter, you can click here to read it:
This is a guide to teach you “how to build a quadcopter frame”, and this is the first step about build a quadcopter. For beginners, this guide will give you much help. And this article’s source is Myfirstdrone, and I will share more build quadcopter steps in future. [Read More…]
This is a UAV Build experience shares, I wrote some quadcopter build articles, but it is a mini quad, not like this UAV, this is a S500 UAV build. Its actually a rebuild of a Kickstarter project (Fourbot) that I backed a few years ago. I ended up with a bunch of cheap components, no build instructions and very little support from the project creator. With a lot of googling and help from other backers I got it built and in the air but [Read More…]
Hi dear RC Fans, I’d like to share the experience of racing drone RoboCat 270 build. In this post i will adding the 3D printable improvements that go specifically designed for this model all ready Done:
3d Power PCB Support model
Need to improvements:
I think most newbie to drone will face one question, should you build or buy your first quad? The question has came up a lot.
Build or Buy? Let’s break it down into the basics…………
Before you attempt to span the void between “DIY or Ready-To-Fly?”, you should buy your first quad and it should be a small, ready to fly quadcopter that you can use to fly around your apartment, living room, history class, back yard, etc. just to learn the basics of control. Take it out the box, charge it up and start flying the same day you brought it home. Do this before flying anything that is larger, more expensive, took a lot of time to build, etc. but please note: don’t attempt to fly in your history class!